Have Query ? Reach Out Us!
Have Query ? Reach Out Us!
04 Jul , 2026
Rubber Lined Split Clamp Manufacturer | HVAC Pipe Clamps — Ferry International
Ferry International — ISO 9001:2015 Certified | Ghaziabad, India | Exporting to USA, Middle East, Southeast Asia
A rubber lined split clamp is a two-piece pipe clamp with an EPDM (Ethylene Propylene Diene Monomer) rubber liner bonded or fitted inside the metal body. The rubber liner sits between the metal clamp and the pipe surface — doing two jobs at once:
The "split" design means the clamp comes in two halves — upper and lower — connected by one or two bolts. The pipe drops into the lower half and the upper half clamps over it, making installation fast even on existing piping.
| Parameter | Details |
|---|---|
| Liner Material | EPDM rubber (standard) |
| Body Material | Mild Steel (MS), Stainless Steel (SS 304 / SS 316) |
| Size Range | 1/4" to 3" standard; custom on request |
| Connection Nut | M6 (up to 3/4"), M8 (1" to 2"), M10 (2 1/2" to 3") |
| Pipe OD Range | 6 mm to 80 mm (standard) |
| Bolt Configuration | Single bolt or double bolt |
| Finish | White zinc plated (MS), polished or passivated (SS) |
| Certification | ISO 9001:2015 |
| Temperature Range | EPDM liner: -40°C to +120°C |
| Clamp Size | Pipe OD Range | Nut Size |
|---|---|---|
| 1/4" | 6 – 10 mm | M6 |
| 1/2" | 10 – 16 mm | M6 |
| 3/4" | 16 – 20 mm | M6 |
| 1" | 20 – 25 mm | M8 |
| 1 1/4" | 25 – 32 mm | M8 |
| 1 1/2" | 32 – 40 mm | M8 |
| 2" | 40 – 50 mm | M8 |
| 2 1/2" | 50 – 65 mm | M10 |
| 3" | 65 – 80 mm | M10 |
Custom sizes for larger OD available on request with drawing.
Most buyers switch to rubber lined clamps after one of two field failures:
Scenario 1 — Pipe wear: A standard metal clamp grips directly on the pipe wall. Over months of operation, micro-movement at the contact point creates wear grooves, eventually leading to pinhole corrosion or stress cracking at supports. A rubber liner prevents this entirely.
Scenario 2 — Vibration transmission: Standard clamps transmit pump and compressor vibration directly into the building structure, creating noise in ceilings, walls, and floors. Rubber lined clamps break the vibration path — the rubber's elasticity absorbs the movement before it reaches the structure.
For HVAC systems, the additional cost of rubber lined clamps over standard MS clamps is typically recovered within 1–2 years through reduced maintenance, eliminated rework, and avoided noise complaints.
Share these details for a same-day quote:
📧 contact@ferry-international.com | 📞 +91 9990877399 🔗 Request Rubber Lined Split Clamp Quote →
Ferry International exports rubber lined split clamps to HVAC contractors, mechanical distributors, and project procurement teams in New Berlin, Wisconsin and across the United States. HVAC and plumbing projects in Wisconsin — commercial buildings, hospitals, industrial facilities — routinely spec rubber lined clamps for vibration control on chilled water and hot water systems.
Why US HVAC buyers source rubber lined clamps from Ferry:
Shipping timeline India → New Berlin, WI: Manufacturing 2–3 weeks → Sea freight to US port 18–25 days → Inland to Wisconsin 2–3 days. Total: 6–8 weeks from confirmed PO.
📧 contact@ferry-international.com | Whatsapp +91 9990877399 🔗 Get a Rubber Lined Split Clamp Quote for New Berlin, WI →
What rubber material is used in the liner? Standard liner is EPDM — rated for -40°C to +120°C, suitable for HVAC and most industrial fluids. Neoprene or nitrile liners available for oil-contact applications on request.
Can rubber lined clamps handle high pressure piping? Yes — the rubber liner does not affect the clamp's structural load capacity. The metal body handles the load; the liner handles surface contact and vibration. For very high-pressure lines, specify heavy-duty rubber lined clamps.
How is the rubber liner attached? The EPDM liner is either mechanically fitted (clip-in) or bonded to the clamp body. Both methods are available — specify at order stage.
Do you supply split clamps for pipes larger than 3"? Yes — custom sizes for 4", 6", and larger OD are available against drawing or sample. Share the OD and application for a quote.
Related Products: U-Clamp | Sprinkler Clamp | Clevis Hanger | Cable Clamp
Have Query ? Reach Out Us!
Recent Post
Since the inception, Ferry International is offering the huge range of the anchors, screws, nut and bolts, clamps, and pipes, wire mesh, etc. With the experience of more than six decades in the field of manufacturing industrial fasteners to the meet the demand of every industry, we are world class Nut Bolt manufacturers, suppliers, and exporters.
Follow Us
Important Links
Our Services
Contact Us
.jpg "Anchor Bolt Manufacturers in Haridwar")
.jpg "Brass Anchor Manufacturers Jamnagar Gujarat")
.jpg "Top Anchor Bolt Manufacturers in India (2026) | Ferry International")
.jpg "Drop-In Anchors for Concrete Fixing")
 Bulk Supplier.jpg "Rubber Lined Split Clamp (Cushioned Pipe Clamp) – Bulk Supply")
.jpg "Sprinkler Clamp Manufacturer in Telangana | Project Bulk Supply by Ferry International")
.jpg "Rubber Lined Pipe Clamp")
.jpg "How to Choose Fasteners for Industrial Projects")
.jpg "Bulk Anchor Bolt Supplier for New Berlin,")
.jpg "Anchor Bolts Supplier for Bulk Orders in South Africa")
